Floor Sanding vs. screening

Whenever a wood floor loses its shine, the common solution would be to sand it right down to raw wood and totally refinish it. But often, that’s the wrong approach.

All wood floors are guarded by a clear coating that eventually turns into scratched, scuffed and dull. However as long as the damage is shallow—in the covering and not in the wood itself—you can update the floor by adding a brand new coat of polyurethane right over the old end.

This article will assist you to do just that. As with every wood-finishing project, 90 percent of this task is preparation. You have to clean up the floor, touch up any thick scratches and roughen the existing end with sanding screens so the new finish will stick well. Expect to spend one particular full day on this prep work. The re-coating alone usually takes under an hour.

Re-coating takes much less time, ability, and cash than full-scale sanding and refinishing. Even though roughing up the current finish produces lots of dust, it’s still a lot less untidy compared to sanding right down to bare wood. There’s another benefit: Each time you sand a floor down to bare wood, you take away a few of the wood. A strong wood floor can be sanded several times before that’s an issue. However laminated floors (glue-down or floating floors) possess merely a slim layer of nice-looking wood veneer over a plywood-like base. The veneer is generally sanded once or twice—after that, sanding are going to introduce the plywood core beneath.

For more information visit our website: http://www.woodfloorplanetnj.com/

Call us @ 201-330-0909